GIOTAS panels
are made off:
BEECH
OAK
PINE
CAROLINA PINE
IROKO
CHERRY
WHITE ASH
WALNUT
|
GIOTAS S.A.
|
Edgeglued laminated panels by GIOTAS are products complying the highest
specifications.
Combining modern scientific knowledge and a long experience in wood
processing GIOTAS offers finished products of excellent quality.
The greatest guaranty for the total quality of the products is the
perfect Know-how of the GIOTAS company which is already in the fourth generation
of its existence in the wood processing industry.
Generally, it is only possible to accurately season small pieces of
timber. Kiln drying larger pieces, especially hardwoods more than 40 mm
thick, is always difficult and costly. By working with small sections,
as we do with GIOTAS GLULAM, accurate seasoning is possible. Strength reducing
and unsightly faults so often found in solid timber can also be rejected.
GIOTAS only use timber which has been kiln dried to controlled tolerances
and with a moisture content between 10% - 12%.
European BEECH (Fagus Sylvatica)
Technical Characteristics:
Pale brown color becoming reddish brown following to
light. With a density of 640-720 Kg/m3 , this is one of the hardest woods.
Applications:
This is a fine and resistant wood , traditionally used
in the manufacturing of furniture , the construction of staircases , kitchen
benches and drawer frames , wooden floor tiles etc. |
 |
European OAK (Quercus Rodur)
Technical Characteristics:
Yellowish brown color eventually showing golden spots
. With a density of 630-720 Kg/m3, this is a hard wood.
Applications:
A classic quality wood for furniture, staircases, kitchen,
benches, doors and floors. |
 |
European PINE (Pinus Sylvestris)
Technical Characteristics:
Yellowish color , becoming reddish yellow after
exposure to light. With a density of 470 kgr/m3, this is a soft wood.
Applications:
This wood is widely used in the fabrication of furniture,
shelves for light furniture, stairs as well as wooden coatings and decorative
profiles. |
 |
Carolina PINE (Pinus Palystris)
Technical Characteristics:
Reddish yellow color with vivid grains. With a density
of 450-490 Kg/m3, this is a soft wood.
Applications:
A classic quality wood for furniture fabrication, manufacture
of selves, construction of staircases, doors and floors. |
 |
IROKO (Clorophora excelsa)
Technical Characteristics:
Yellowish brown color, brown and brown.
With a density of 640 Kg/m3, this is one of the hard
woods.
Applications:
This is a strong an resistant wood traditionally used
in shipbuilding, furniture making and in the fabrication of staircases,
sounding boards, floors. |
 |
White ASH (Fraxinus excelsior)
Technical Characteristics:
White to pale brown color with dark brown spots, depending
on the sawing method. The wood has intense grains.
With a density of 690 Kg/m3, this is one of the hard
woods.
Applications:
A classic wood for the fabrication of the furniture,
staircases and floors. |
 |
go up
|
